Keresés

Részletes keresés

nemethrx Creative Commons License 2009.06.24 0 0 353
Kedves Meister, tényleg nem szoktam ide irni, ettől még bízom benne, hogy kommentem a témában releváns volt, ha tudsz más oldalt, ami magyar hostingokról megbízhatóságot közöl, akkor légyszi oszd meg velem, mert érdekelne... Szerintem jó kezdeményezés, sok a kókler cég...
Előzmény: Meister (349)
Rckbl Creative Commons License 2009.06.22 0 0 351
Teljesen jó árak. arra figyelj, hogy az olcsóbb csomagok, bár nagy tárhelyet adnak, de csak statikus tartalommal tudod őket feltölteni. pl. fórumot csak kiwi csomagban (16.800, júl. 1. után valószínűleg 17.500 Ft/év) vagy a felett tudsz üzemeltetni.

Ellenben vannak olyan szolgáltatók, akik kisebb tárhelyet szolgáltatnak de nem akadályozzák meg egy fórum üzemeltetését. Pl ha írsz egy privát üzenetet, akkor tudok javasolni ilyen dinamikus tárhelyet évente 3.900 Ft tól (bruttó ár), amire bármilyen dinamikus tartalmat feltölthetsz.

ilyen tartalom pl. egy fórum, egy joomla vagy wordpress tartalomkezelő, egy olvasók által is módosítható online naptár, egy webes kérdőív... stb stb

statikus tartalom pedig pl. egy egyszerű céges honlap, ahol a cég bemutatkozik, kapcsolati menüpontot ad meg, letöltésre kínálja a legújabb targonca pdf adatlapját, de a cég hírlevelére feliratkozási lehetőséget már nem ad.
Előzmény: Törölt nick (350)
Meister Creative Commons License 2009.06.22 0 0 349
Egyébként mind a #345, mind a #347 szerintem egy most regisztrált nick, és a saját szolgáltatásukat viszik ezzel a reklámozással.

mert az OK, hogy pl. mi magunkat reklámozzuk itt, de nem igazán reklám az a mit csinálunk, hanem tanácsadunk is. Ellenben ez a két hozzászólás simán reklámozási céllal került ide be, mindkettőnek 1-2 hozzászólása van összesen.
Előzmény: Rckbl (348)
Rckbl Creative Commons License 2009.06.22 0 0 348
Pontosan... a hosting55.hu sem szerepel rajta, pedig ez is versenyképes mind árban, mind rendelkezésre állásban.
Előzmény: Meister (346)
LinkX Creative Commons License 2009.06.22 0 0 347
Itt van pár jó fizetős és ingyenes tárhely. Aki több honlapot szeretne üzemeltetni, az már találhat itt 1.99 dollártól korlátlan tárhelyet ingyen domain-nel, van szkript installer is tehát bármilyen cms rendszert pillanatok alatt telepíthetünk és futtathatunk.
Akinek csak egy honlapja van, annak meg megfelelő lehet egy 1500 MB-os reklámmentes ingyen tárhely.
http://bestoftarhely.info
Előzmény: r04 (342)
Meister Creative Commons License 2009.06.19 0 0 346
Érdekes, hogy pl. az as.hu nem is szerepel rajta, pedig árban és rendelkezésre állásban is versenyképes lenne a Windows-os tárhelyek piacán. :-)
Előzmény: nemethrx (345)
nemethrx Creative Commons License 2009.06.19 0 0 345
Tárhelyekről megbízhatóságot találsz a www.toptarhely.hu (www.toptarhely.hu) oldalon, meg összehasonlításokat is...
Meister Creative Commons License 2009.06.06 0 0 343
Szia, én tudok ajánlani. Keress meg mailban, és találjunk ki valami megoldást.
Előzmény: r04 (342)
r04 Creative Commons License 2009.06.05 0 0 342

Hello Mindenkinek!

 

Weblapokat szeretnék feltenni az internetre és tárhelyet keresek. Tudtok-e ajánlani, valami olcsó, de megbízható tárhelyet, ahol c-panel, joomla telepítés szolgáltatás is van?

Esetleg az sem jönne rosszul, ha tudtok hozzá rendelkezésre állást is mondani.

 

Előre is köszi!

Meister Creative Commons License 2009.05.23 0 0 341
Az esetek nagyrészében 100 megabites kanóccal kapcsolódnak a gépek a szerverhotel routereihez, tehát ez esetben 100 megabit.
Elvileg lehet csatlakozni gigabites ethernettel is, de nekem az kicsit feleslegesnek tűnik, hiszen egy szerver CPU-ban, és RAM-ban már akkor kezd limitált lenni, ha gigabites sávszélen nyúzzák, és dinamikus tartalom van rajta. Ha persze főképpen statikus tartalom van rajta, akkor minden további nélkül ki lehet használni a gigabites portot.

Szóval ennek függvényében én azt hiszem, hogy hihető a 100 megabit is, és az 1 gigabit is.

Ha nálad sok SQL query lesz, akkor a gondot sokkal inkább a CPU, a RAM, és a lemezelérés szűkössége fogja okozni, semmint az effektív sávszélesség.

Javaslom, hogy ahova mész, kérj 30 napos pénvisszatérítési garanciát (nálam, az as.hu-nál van ilyen), és teszteld le a portálmotorodat különböző napszakokban, hogy hogy fut.
Előzmény: joecantor (340)
joecantor Creative Commons License 2009.05.23 0 0 340
Nekem fokent magyarorszagi celkozonsegre kell optimalizalnom ugyhogy a nemzetkozi savszel nem tul fontos csak nem bizok olyan szolgaltatoban amelyik hazudik barmilyen feature-rol.

Olyan oldalhoz kene tarhely ahol naponta tobb ezer SQL queryt kene processzalni
es a usernek ne kelljen varnia az eredmenyre nyugdijas koraig.

Szerinted mennyi az a maximum hazai savszel, magyarorszagi servernel, ami meg hiheto? 100 Mbit?
Előzmény: Meister (337)
Meister Creative Commons License 2009.05.22 0 0 339
A BIX-szel sok gond nem szokott lenni egyik cégnél sem, az "ingyen" van nekik. Azt addig bővítik, míg kell.
A nemzetközi az, ami érdekesebb. Egyébként én az Interware szerverhotelben vagyok, és még soha senki nem panaszkodott a nemzetközi sávszélre, pedig van egy pár külföldi ügyfelem. De jellemzően nem warezFTP-t üzemeltetnek, szóval nekik az a lényeg, hogy a levelezés jól menjen, és a weblapok gyorsan elérhetőek legyenek, ezeket meg teljesíti az Interware is bőven.
Előzmény: oldmumus (338)
oldmumus Creative Commons License 2009.05.22 0 0 338
Talán a Datanethez hasonlóan a nagy magenta T-t leszámítva még az Invitel mint "nagy" alternatív telcó cég tud megbízható és nagy BIX és nemzetközi sávszélességet admi. Tehát legjobb szerverhelyek ezen három helyen vannak.
Meister Creative Commons License 2009.05.22 0 0 337
A maxer, és a tárhely.eu a deninet szerverszobájában vannak. Ott ki van szárva, hogy rendes nemzetközit tudnának adni. Szerintem.
A 3in1 a datanetnél van, abban a szerverhotelben elvileg jó nemzetközi jár minden szervernek.
Előzmény: joecantor (335)
Meister Creative Commons License 2009.05.22 0 0 336
Feltehetően nem egy szerverük van, hanem több, és azokat adják össze, így jön ki a 7 gigabit. Ilyen alapon nekem is van ennyi, ha az összes vasamét összeadom, amire tudom tenni a weblapod. :-)

Jó nagy kamu.
Előzmény: joecantor (335)
joecantor Creative Commons License 2009.05.22 0 0 335
Meister,


Mit szolsz ahhoz hogy a maxer.hu 7Gbit/s BIX csatlakozást,
max. 2Gbit, min. 100Mbit/s nemzetközi csatlakozást iger?

Szerinted ez hiheto? Nekem nagyon buzlik, mikor a 3in1.hu - akik eddig korrektnek tuntek - csak max 100Mbit/s hazait igernek.

Vagy egy hete kinlodok mar, most leszukult a kor harom szolgaltatora
maxer.hu
3in1.hu
tarhely.eu


Ez utobbi baromi marketinges szagu, utallom az ilyet, de attol meg lehet jo a service.
Valakinek van valami tapasztalata veluk kapcsolatban?

Rckbl Creative Commons License 2009.05.18 0 0 334
http://www.hosting55.com vagy a legújabb, ahol te adod meg az árat: http://www.mocsaribeka.hu
Előzmény: Törölt nick (331)
Doky586 Creative Commons License 2009.05.16 0 0 333

Sziasztok !

 

Jobb híján ebbe a topicba írok, de valójában én nem web- vagy ftp- szervert akarok üzemeltetni hanem egy meglevő szolgáltatót keresek a neten aki netes adattárhelyet árul. a NAS szerverekhez hasonló HDD szerű PC-hez meghajtóként csatlakoztatott netes tárhelyet keresek 10-100 GB közti méretben megfelelően erős biztonsággal hogy csak én tudjam írni és olvasni is, bárhol is tartózkodok Európától Amerikáig mindig elérhessem..

 

Van ilyen szolgáltatás? "Olcsó tárhely" érdekelne..

Meister Creative Commons License 2009.05.15 0 0 330
off
mondhatni ennivaló!
/off
Előzmény: locsemege (329)
locsemege Creative Commons License 2009.05.14 0 0 329
off

Jó a nick-ed! :))

on
Előzmény: Törölt nick (327)
Rckbl Creative Commons License 2009.05.14 0 0 328
Igen, ez az ár a domain regisztrációt és a tárhelyet is két évre előre fizetve tartalmazza. Ha a 200MB tárhelyet szeretné bővíteni, akkor mindent időarányosan számolunk, pl. bővítés 500 MB-ra (ha még 2 év van hátra az előfizetésből) kb. 7.000 Ft lenne. Minden ár bruttó, tartalmazza az áfát.
Előzmény: Törölt nick (327)
Rckbl Creative Commons License 2009.05.14 0 0 326
Szia!
Szintén magamat ajánlom. .hu regisztráció 2 évre és hozzá 200MB tárhely, szintén két évre = 13.650 Ft általános forgalmi adóval együtt.
Előzmény: Törölt nick (323)
Törölt nick Creative Commons License 2009.05.13 0 0 325
Természetes, http://eeuhost.com
Előzmény: Rckbl (315)
Meister Creative Commons License 2009.05.13 0 0 324
Szia, én ajánlom magamat, ha ez még belefér a párezerbe.
Előzmény: Törölt nick (323)
Rckbl Creative Commons License 2009.05.11 0 0 322
Ez egy rendes vas, nem virtuális.

[root@localhost ~]# dmesg output
Linux version 2.6.18-128.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 10:44:23 EST 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffe2ec0 (usable)
BIOS-e820: 000000000ffe2ec0 - 000000000ffe6ec0 (ACPI data)
BIOS-e820: 000000000ffe6ec0 - 000000000ffeef00 (ACPI NVS)
BIOS-e820: 000000000ffeef00 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 65506
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 61410 pages, LIFO batch:15
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 IBM ) @ 0x000fdfe0
ACPI: RSDT (v001 IBM CDTPWSPM 0x00001010 IBM 0x00000000) @ 0x0ffe6e40
ACPI: FADT (v001 IBM CDTPWSPM 0x00001010 IBM 0x00000000) @ 0x0ffe6dc0
ACPI: DSDT (v001 IBM CDTPWSPJ 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf808
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Detected 662.234 MHz processor.
Built 1 zonelists. Total pages: 65506
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Found and enabled local APIC!
mapped APIC to ffffd000 (fee00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0754000 soft=c0734000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 252096k/262024k available (2122k kernel code, 9356k reserved, 884k data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1325.46 BogoMIPS (lpj=662732)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0383f3ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0e20)
CPU0: Intel Pentium III (Coppermine) stepping 03
SMP motherboard not detected.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2969k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd82c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Firmware left 0000:00:10.0 e100 interrupts enabled, disabling
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [PIN1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [PIN2] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PIN3] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PIN4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xf800-0xf87f could not be reserved
pnp: 00:0b: ioport range 0xfe00-0xfe0f has been reserved
pnp: 00:0b: ioport range 0x370-0x371 has been reserved
pnp: 00:0b: ioport range 0xfd80-0xfd8f has been reserved
pnp: 00:0b: ioport range 0xfd90-0xfd9f has been reserved
pnp: 00:0b: ioport range 0xfda0-0xfdaf has been reserved
PCI: Bridge: 0000:00:01.0
IO window: 7000-7fff
MEM window: feb00000-febfffff
PREFETCH window: f0000000-fe8fffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1241108817.294:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 4F03F897CD3DCED2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xec000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:02.1
PCI: VIA IRQ fixup for 0000:00:02.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci0000:00:02.1
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 2F020L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LTN485S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 40718160 sectors (20847 MB) w/2048KiB Cache, CHS=40395/16/63, UDMA(66)
hda: cache flushes supported
hda: hda1 hda2
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0<6>Time: tsc clocksource has been installed.
S1 S4 S5)
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 397k
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:02.2 (0000 -> 0001)
ACPI: PCI Interrupt Link [PIN4] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [PIN4] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:02.2: UHCI Host Controller
uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.2: irq 10, io base 0x0000fce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2429
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1241108825.410:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
security: 3 users, 6 roles, 1914 types, 234 bools, 1 sens, 1024 cats
security: 61 classes, 69080 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1241108826.345:3): policy loaded auid=4294967295 ses=4294967295
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:0f.0: Try the "8139too" driver instead.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [PIN3] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [PIN3] -> GSI 9 (level, low) -> IRQ 9
eth0: RealTek RTL8139 at 0xd0892f00, 00:40:f4:98:21:dc, IRQ 9
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [PIN4] -> GSI 10 (level, low) -> IRQ 10
e100: eth1: e100_probe: addr 0xfe9ff000, irq 10, MAC addr 00:02:55:70:2A:98
hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PC Speaker as /class/input/input0
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt Link [PIN2] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [PIN2] -> GSI 5 (level, low) -> IRQ 5
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: Power Button (FF) [PWRF]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
SCSI subsystem initialized
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 524280k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:524280k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
microcode: CPU0 updated from revision 0xc to 0x13, date = 02062001
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (2047 buckets, 16376 max) - 228 bytes per conntrack
ADDRCONF(NETDEV_UP): eth0: link is not ready
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
e100: eth0: e100_watchdog: link down
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Előzmény: Meister (321)
Meister Creative Commons License 2009.05.11 0 0 321
Szerintem meg virtuális vas.
Előzmény: Rckbl (319)
Rckbl Creative Commons License 2009.05.11 0 0 320
és meg is van, működik:

10:36:45 up 10 days, 22:09, 1 user, load average: 0.00, 0.01, 0.00

100%[=======================================>] 69,231,745 1.12M/s in 59s

10:40:01 (1.12 MB/s) - `iTunes811.dmg' saved [69231745/69231745]


:))
Előzmény: Meister (318)
Rckbl Creative Commons License 2009.05.11 0 0 319
Kanadai berendezés, ezen nincs áfa.
Euból eus adószámmal áfa nélkül vásárolni.. ha nem fizeted meg az áfát pl németországban az eu-s adószámoddal, akkor itthon kell pótolnod a befizetést, 20%ot 19% áfa helyett.
Azon gondolkodom, hogy ez a 10 dolláros gép, hogy éri meg az embernek. Ennyiből az áram sem jön ki. A gépet valószínűleg ingyen bontotta valahonnan.
Előzmény: Meister (318)
Meister Creative Commons License 2009.05.11 0 0 318
Ok, ez mondjuk jogos, hiszen rendes Virtuális vas is 30 USD-től kezdődik.
10 USD-ben benne van az ÁFA, gondolom. Ezzel mindenki szopik, egy megoldás van rá, kell EU-s adószám, és akkor nem számolhatnak fel ÁFÁt.
Előzmény: Rckbl (317)
Rckbl Creative Commons License 2009.05.11 0 0 317
Lehet, hogy ócskavas, de tesztelni, "szerveresdit játszani" tökéletes lehet.
Eddig a legolcsóbb önálló szerver, amit láttam az egy hasonló paraméterű (csak kisebb, 10G lemezzel) netdirektes gép, de az havonta 19 euróba kerül.
-próbából vettem egyet egy hónapra:) majd beszámolok a tapasztalataimról
első tapasztalat: egy hónapra nem 8, hanem 10USD az ár.
Előzmény: Meister (316)

Ha kedveled azért, ha nem azért nyomj egy lájkot a Fórumért!